Phosphate ore Raymond mill

Phosphate ore pulverizer is a kind of pulverizing equipment. It is mainly suitable for superfine powder processing of conventional non-flammable and explosive materials with Mohs hardness below 6 and humidity less than 8%, such as: kaolin, limestone, granite, dolomite, ceramics, quartz, bauxite, bentonite, gypsum, coal, activated carbon, etc.

 

 

Phosphate rock is mostly produced in sedimentary rocks, but also in metamorphic rocks and igneous rocks. Except for some cases, phosphorus in minerals always exists in the form of orthophosphate, and the main mineral of phosphorus is apatite. For the application of phosphate rock materials, most of them are used in chemical industry, building materials, road construction, etc., and high-quality products are obtained after processing by a phosphate rock pulverizer for use.

 

 

 

Phosphate ore pulverizer is mainly composed of main engine, blower, ultra-fineness analyzer, finished product cyclone powder accumulator, bag filter and connecting air ducts, etc. It is used for material grinding work. In addition, it can be equipped with buckets according to user needs. Auxiliary equipment such as elevators, storage bins, electric control cabinets, powder feeders, and jaw crushers are used in various production lines.

 

 

 

 

 

1. The phosphate rock mill has good wear resistance, reliable operation and high efficiency.

2. The phosphate rock pulverizer adopts a high-pressure spring, and its pressure can reach about 1400KG.

3. The overlapping multi-pole sealing grinding device of the phosphate rock pulverizer has good sealing performance and the dust removal effect fully meets the national dust emission standard.

4. In the case of the same output and fineness, the price of the phosphate rock mill is only one-eighth of the jet mill, and the scope of application is also larger.

 

 

 

1. The vertical structure is more reasonable

The whole machine is a three-dimensional structure, with a small footprint and strong systemicity. From block material to finished powder, it is completed by an independent production system.

 

2. Good sealing and more environmental protection

The design of the air seal structure is reasonable, which can prevent coarse particles from mixing into the interior of the impeller from the end face of the impeller and contaminating the finished product.

 

3. Selected raw materials are more durable

All parts are made of high-quality materials, especially in the manufacture of wearing parts, all of which are made of good castings and profiles, with fine craftsmanship and enhanced durability of the whole machine.

 

4. High production capacity

The sieving rate is as high as 99% and the finished product has uniform fineness and high quality.

 

5. The granularity of finished products can be adjusted

The particle size of the finished product can be adjusted arbitrarily within the range of 80-325 mesh, which can meet various industrial requirements.

 

 

 

When the phosphate ore pulverizer is working, the phosphate ore material is first fed into the machine from the feeding hopper on the side of the machine casing by the feeding device. The axis revolves. Because the material itself has self-transmission, it will generate a large centrifugal force. Under the action of the centrifugal force, the grinding roller swings outward and is pressed against the grinding ring to crush the phosphate rock material between the grinding roller and the magic ring. , repeated cycles to meet production requirements.

 

 

 

Related products